Alpine MRX-T15

Δικάναλος Ενισχυτής
Κωδικός : MRX-T15
209.00 €

Η τιμή περιλαμβάνει Φ.Π.Α. 24%
  • Διαθέσιμο σε 1-3 ημέρες

Περιγραφή

Alpine MRX-T15

Δικάναλος Ενισχυτής

 

2 Κανάλια, Μέγιστη ισχύς εξόδου: 350W.
Ισχύς εξόδου RMS: 2 x 75W(2Ω), 2 x 50W(4Ω), 1x 150W(4Ω)

Ο Alpine MRX-T15 είναι έτοιμος να βελτιώσει στο maximum, την ακουστική μέσα στην καμπίνα του αυτοκινήτου σου. Πλέον θα μπορείς να αυξάνεις την ένταση ξεχνώντας, τις παραμορφώσεις, των ενισχυτών χαμηλής ισχύος! Είναι δύο καναλιών, με μέγιστη ισχύ εξόδου που αγγίζει τα 350 W και τον χαρακτηρίζει απόκριση συχνοτήτων, η οποία μπορεί να κυμανθεί μεταξύ 5Hz - 45kHz .

All Digital Lineup

The X-Power series uses much of the same digital technology as the PDX series, achieving high efficiency with excellent audio performance, including low distortion, high damping factor and high S/N ratio.

Easily Upgrade Any System


Speaker Level Inputs let you connect these amps directly to factory-installed head units that do not have preamp outputs, so you can upgrade the original system with higher power and better speakers.

Remote Sensing

The remote sensing function turns the power on automatically when the amp detects an incoming audio signal. There is no more need for an extra remote line.

Smaller Footprint

PDX digital technology means high efficiency, so the X-Power amps are up to 29% more compact than previous models, making installation even more convenient.

Effective Heat Protection

If interior heat reaches unacceptably high levels, a Thermal Protection circuit decreases power in two steps rather than interrupting the music. It also provides over-voltage and overcurrent protection

Χαρακτηριστικά

Installation

  • Terminal Layout: Two-Sided
  • Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals

General

  • Amplifier Type: Class-D (Digital)
  • Channel Design: 2 Channel
  • Thermal Control: Thermal Management Control
  • Power Supply: MOSFET
  • Power Supply Design: DC-DC PWM Power Supply
  • Board Circuitry: S.T.A.R. Circuitry
  • Current Protection: Over-Current, Over-Voltage and Thermal Protection
  • Power Indicator: Top Mounted Blue LED Power Indicator
  • 2-Channel Speaker Level Input
  • Crossover: Variable Lowpass & Highpass Filter
  • Built-in Bass EQ
  • Final Outputs: Direct FET
  • Board Design: 6-layer Glass Epoxy PC Board
  • Continuously Adjustable Gain Control

Max Power Output Ratings

  • Total Max Power: 350W

RMS Power Ratings

  • Per Channel into 4ohms, 14.4V (≤1%THD+N): 2 x 50W
  • Per Channel into 2ohms, 14.4V (≤1%THD+N): 2 x 75W
  • Bridged into 4ohms, 14.4V (≤1%THD+N): 1 x 150W

Sound Tuning

  • Crossover Frequency (LPF/HPF Selectable): Variable, 50 - 400Hz (-12dB/oct.)
  • EQ (Equalizer): Bass EQ (fc=50Hz) 0 to +12dB

Dimensions

  • Heat Sink: 190 x 58 x 230 mm
  • Footprint: 250 x 58 x 230 mm

General

  • Power Requirements: 14.4V DC (11 - 16V)
  • Input Sensitivity (RCA Input): 0.2 - 4.0V
  • Input Sensitivity (Speaker Level Input): 0.5 - 10V
  • Input Impedance: >10k ohms
  • Frequency Response (+0, -3dB: 1W into 4 ohms): 5Hz - 45kHz
  • Frequency Response (+0, -1dB: 1W into 4 ohms): 7Hz - 30kHz
  • THD+N (10W into 4 ohms): <0.02%
  • THD+N (Rated Power into 4 ohms): <0.07%
  • Damping Factor: >500
  • Signal to Noise (Rated Power into 4 ohms): 104dB
  • Weight: 2.3kg